Hello guys in this blog I am going to show how to manage “Tenda N4 n150 4 LAN Wireless Router”. I have choose this device for tutorial because it is an router with good interface so it would be easy to install for beginners.
The router comes with 4 Lan ports and a 5dB antenna which is enough to cover a 3BHK flat, The cost of the device is 640 Rs at amazon. And it is also very user friendly compared to other devices and various other features are it can be used as a booster to the presently connected 802.11 network. This is a wireless router so you need to have an modem to get an internet connection. Considering you have connected it to your system lets go into the tutorial.
Open your browser and type 192.168.0.1 in the URL bar
Login to your router, the default username is admin and default password is admin.
The default password for your Wi-Fi connection is 12345678, Click ok and enter into the control panel of the router where you can change the Wi-Fi password.
Select the wireless tab to configure the wireless settings, The primary SSID is the name of the Wi-Fi network you are giving, In this case it is “You are being watched.!!” You can change it to the name which you want.
Select wireless security in left side of the panel as shown in the figure and you can change the password you need there and click ok.
Keep WPA algorithm to AES since other algorithms may make your network slower and less secure, Don’t change any recommended settings unless you know what you are doing.
That’s it your Wi-Fi connection must have started working now according to your settings and if you want to change the routers password you can change it in TOOLS tab—–> Change password and click ok to save your settings.
If you have done any mistake you can just restore your router as shown in the image.